Overvoltage protection T1+T2+T3 DS 130 VGS
Characteristics
- surge protector type 1+2+3
- 10 years warranty
- limp = 12.5kA/pole (10/350µs)
- optimized to TOV
- internal disconnection, status indicator
- follow and operating current: none
- remote signaling
Nominal line voltage Un AC
230 V
Continuous voltage AC max.
275 V
Discharge current max. (8/20) µs [Imax]
50 kA
Combined shock [Uoc]
20 kV
Protection level max. (at 5kA)
0.65 kV
Protection level max. (at 12.5kA)
0.8 kV
Protection level max. (at Imax)
1 kV
Operating current [Ic]
0 kA
Follow current [IF]
0 kA
follow current extinguishing capability [Ifi]
Unendlich
TOV-voltage L-N [UT]
335 V / 5 sec.
TOV-voltage L-PE [UT]
1200 V / 200 ms / 300 A
Short circuit resistance (Icw)
25 kA
Fault indication
Mechanisch, Rot
Degree of protection
IP 20
Fuse max. (gG)
160 A
Mounting on
Hutschiene 35 mm
Signaling on the device
Optic
Connection cross section solid / stranded max.
1.5 mm²
Switching capacity signaling contact
250 V / 0,5 A (AC) - 30 V / 2 A (DC)
Energetically coordinated protective effect to the terminal
Yes
Integrated backup fuse
No
Exhausting
No
Mounting method
DIN rail (top hat rail) 35 mm
Network configuration
Yes
Voltage protection level L-N [Up]
1 kV
Remote signalling
Yes
Total discharge current (8/20) (L N-PE)
50 kA
Degree of protection (IP)
IP20
Homologation
VDE, ÖVE und UL
Test standards International
IEC 61643-11
Test standards USA
UL 1449 ed.3
Test standards Europe
EN 61643-11
![Impulse current [Iimp]_(10/350)](https://image.aflury.ch/imageService/?width=60&height=60&grow=1&schema=rgb&img=sub47%2F17b59bfbba235a78.jpg)
![Response time [ta]](https://image.aflury.ch/imageService/?width=60&height=60&grow=1&schema=rgb&img=sub47%2F17b59c00a5a65f78.jpg)
![Voltage protection level [Up]](https://image.aflury.ch/imageService/?width=60&height=60&grow=1&schema=rgb&img=sub178%2F17b59c335bb80578.jpg)
