Protective sleeves slotted 250.002.000
Legend
a) 2 pipe clips of inox are included with screw pintle Ø 6x50mm
Categories
-
Earthing
-
Foundation earthing components
- Connection set Vario
- Foundation earthing set 50m
- Connection set for foundation earthing
- Wedge connector
- Holder to fix the earthing strip
- Parallel clamp
- Clamp, 2-parts
- Cross clamp, 3-parts
- Around cross clamp
- Connection clamp
- Universal contact connector
- Connection set with around cross clamp
- Connection set with clamp
- Connection set with cross clamp
- Connection set with wedge connector
- Connection set with copper cable flexible
- Connection point, short
- Connection set vertical
- Connection set with steel cable
- Connection set for elementary formwork
- Foundation earthing connection for retrofit
- Potential equalization box (rendering)
- Earthing bushing
- Earthing bushing watertight
- Connection part, apart
- Connection part watertight
- Connection part 40kA
- Gasket for connection set
- Extension for connection
- Connecting lug for Strip
- Connection plate and screw
- Accessories connection set vertical
- Mounting holder for connection sets
- Connection set assy. for civil defense systems
- Expansion joint bridging
- Support for earthing strip
- Ring earthing components
- Deep earthing components
-
Foundation earthing components
-
Lightning protection
-
Interception components
- Gutter edge connection
- Ridge conductor holder
- Conductor holder for interlocking tiles
- Conductor holder for flat tiles (nailed)
- Conductor holder for flat tiles (hung-in)
- Conductor holder with clamping plate
- Ridge conductor clip for plain Eternite tiles
- Conductor clip for plain Eternite
- Conductor clip for corrugated Eternite
- Conductor clip for bonding
- Recessed nut set
- Ridge conductor support for flat roof
- Lightning conductor bridge
- Flat roof lead through with wire Cu d. 8mm
- Flat roof lead through with single parts
- Flat roof lead through with T-cable 50 mm2
- Flat roof lead through components
- Air-termination rods
-
Down-conductor components
- Adjustable contact clip
- Adjustable wire holder clip
- Test isolating joint
- Test isolating joint parallel
- Test joint with cone
- Earth lead-in rod
- Inspection door for measurements
- Lightning protection measurements
- Earthing inspection pit for test joint, cast iron
- Protective sleeves, slotted 1/2"
- Pipe clip for protective tube 1/2"
- Fastener for socket-pipe-clip 1/2"
- Protective profile
- Fastening clip for protective profile
- Protective spark gap
- Isolating Spark Gap, interior zone
- Isolating spark gap, outside section
- Isolating Spark Gap, ATEX, outside section
-
Interception components
-
General elements
-
Conductor connections and junctions
- Contact connector Universal
- Derivation clamp for conductor Cu
- Derivation clamp for conductor Al
- Sheet metal connector
- Cross connector for wire
- Cross connectors for wires and strips
- Parallel and cross connector
- Grounding point for welding
- Connector for profile rails
- Earth wire connector
- Access-clip
- Pipe contact clip
- Contact clip
- Connector for wire and strips
- Snow guard connection terminal
- Connecting lug
- Cable connection set
- Connection cable
- H - Flexible connector, flat
- Connection set for sheet metal
- Connection for sheet metal
- Cable lug for sheet metal connections
- Crimping wire lug, 3-hole
- Crimping sleeve DIN
- Reducer DIN
- T-crimping sleeve
- Fixing elements
-
Conductor connections and junctions
-
Equipotential
- Equipotential rail 1-rowed
- Equipotential rail 2-rowed
- Equipotential profile variable
- Accessories
- Equipotential box
- Earthing strip clamps
- Access-clip
- Straight screw connector
- T-screw connector
- 90° screw connector
- Straight mechanical cable lug
- 90° mechanical cable lug
- Ground clamp
- Earthing clamp with adjusting lever
- Spiral cable
- Flexible connector round
- Flexible connector, flat
- Perforated strip
- Accessories for perforated strip
- Conductors
-
Surge protection
- Surge Protection (Type 1)
- Surge protection (Type 2)
- Surge protection (Type 3)
- Photovoltaics
-
Generators combiner boxes
- Coarse and middle protection GAK 111 PG
- Coarse and middle protection GAK 100-MC4
- Coarse and middle protection GAK 200-MC4 s
- Coarse and middle protection GAK 210-MC4 s
- Coarse and middle protection GAK 200-MC4 b
- Coarse and middle protection GAK 210-MC4 b
- Coarse and middle protection GAK 300-MC4
- Coarse and middle protection GAK 310-MC4
- Coarse and middle protection GAK 400-MC4
- Coarse and middle protection GAK 410-MC4
- Coarse and middle protection GAK 104 PG
- Coarse and middle protection GAK 114 PG
- Coarse and middle protection GAK 101-MC4
- Coarse and middle protection GAK 111-MC4
- Coarse and middle protection GAK 212 PG
- Coarse and middle protection GAK 202-MC4
- Coarse and middle protection GAK 212-MC4
- Coarse and middle protection GAK 303-MC4
- Coarse and middle protection GAK 202 PG
- Coarse and middle protection GAK 313-MC4
- MC 4 branching
- MC 4 sealing cap
- MC 4 Fuse connector
- Informatics, Telecommunication
- Coaxial conductor
- Supplies
- Supplies
| Article No. | 250.002.000 |
|---|---|
| E-Number | 156 900 150 |
| Technical specification | |
| Length a | 1500 mm |
| Material | InoxA2 |
| Wire diameter | 6 - 11 mm |
| External diameter | 21 mm |
| Clamping range inch | 1/2 inch |
| Surface protection | unbehandelt |
| Clamping/chucking range | 20.3 - 22.3 mm |
| Commercial specification | |
| Customs number | 72224000 |
| country of origin | CE |
| Logistic specification | |
| VPE Weight | 10 kg |