Categories

Surge protection DLAWTS1

New

Application
Telecommunications and Information Technology

Characteristics
The DLAWTS series surge protection devices protect measurement and control equipment, telecommunications equipment, and data technology systems from lightning strikes and power surges. These surge protection devices are designed to protect a twisted-pair cable and are suitable for all applications with voltages ranging from 6 Vdc to a maximum of 170 Vdc and data rates up to 10 Mbit/s. In the event of a fault, the data signal is disconnected.

Material
UL94 V-0 thermoplastic

Legend
a) Control module up to max. 24 DLATS

Number of wires
1  
Response time [ta]
< 1 ns ns  
Discharge current max. [Imax]
20 kA  
Nominal cross section conductor (min/max)
0.5 - 2.5 mm²
Nominal discharge surge current (8/20)
5 kA  
Nominal load current
0.3 A  
Fault indication
optisch, Fernsignalisierung möglich  
Temperature range
-40.0 - 85.0 °C
Degree of protection
IP20  
Dimensions
Siehe Massbild  
Signaling on the device
Optic  
Connector (information technology)
Clamp  
Mounting method
DIN rail (top hat rail) 35 mm  
With remote signalling contact
Yes  
Test standards Germany
 
Test standards International
IEC 61643-21  
Test standards USA
UL497B  
Homologation
UL  
   
Article No. E-Number      Number of wires Nominal voltage Un Response time [ta] Voltage protection level [Up] Discharge current max. [Imax] Nominal cross section conductor (min/max) Nominal discharge surge current (8/20) VPE Quantity
   
DLAWTS1-24D3 296.421.031 new label 1 24 < 1 ns 0.04 20 0.5 - 2.5 5 1
DLAWTS1-06D3 296.421.011 new label 1 6 < 1 ns 0.02 20 0.5 - 2.5 5 1
DLAWTS1-12D3 296.421.021 new label 1 12 < 1 ns 0.03 20 0.5 - 2.5 5 1
DLAWTS1-48D3 296.421.041 new label 1 48 < 1 ns 0.07 20 0.5 - 2.5 5 1
DLAWTS1-170 296.421.051 new label 1 150 < 1 ns 0.22 20 0.5 - 2.5 5 1