Overvoltage protection T1+T2 DS 130 RS
Characteristics
- surge protector type 1+2
- limp = 12.5kA/pole (10/350µs
- optimized to TOV
- pluggable module
- remote signaling
SPD type
T1 / T2
Impulse current [Iimp]_(10/350)
12.5 kA
max. discharge current (Imax)
50 kA
Response time [ta]
20 ns
Voltage protection level [Up]
1.3 kV
Nominal cross section conductor (min/max)
2.5 - 25.0 mm²
Signaling contact
Yes
Nominal discharge surge current (8/20)
20 kA
Nominal frequency [fn]
50.0 - 60.0 Hz
Nominal line voltage Un AC
230 V
Continuous voltage AC max.
255 V
Discharge current max. (8/20) µs [Imax]
50 kA
Follow current [IF]
0 kA
follow current extinguishing capability [Ifi]
unendlich kA eff
TOV-voltage L-N [UT]
440 Vac
Short circuit resistance (Icw)
25 kA
Fault indication
Mechanisch, Rot
Temperature range
-40.0 - 85.0 °C
Degree of protection
IP 20
Fuse max. (gG)
160 A
Mounting on
Hutschiene 35 mm
Material housing
Signaling on the device
Optic
Connection cross section solid / stranded max.
1.5 mm²
Energetically coordinated protective effect to the terminal
Yes
Switching capacity signaling contact
250 V / 0,5 A (AC) - 30 V / 2 A (DC)
Material housing
Mounting method
Remote signalling
Yes
Degree of protection (IP)
IP20
Voltage protection level L-N [Up]
1.3 kV
Total discharge current (8/20) (L N-PE)
50 kA
Test standards Germany
Test standards International
IEC 61643-11
Test standards USA
UL 1449 ed.3
Test standards Europe
EN 61643-11
Homologation
VDE, ÖVE und UL