Surge protection DLAS1
Characteristics
Designed to protect, against surge voltages due to lightning, telecom lines. Based on gas-tube tecnology with fast switching diodes.When the plug-in module is pulled, the transmission signal is not interrupted.
Number of wires
2
Response time [ta]
<1 ns
Discharge current max. [Imax]
20 kA
Nominal cross section conductor (min/max)
0.4 - 1.5 mm²
Nominal discharge surge current (8/20)
5 kA
Nominal load current
0.3 A
Fault indication
Kurzschluss
Temperature range
-40.0 - 85.0 °C
Degree of protection
IP20
Dimensions
Siehe Massbild
Signaling on the device
Optic
Signal nominal load current
0.3 A
5
Connector (information technology)
Clamp
Mounting method
DIN rail (top hat rail) 35 mm
With remote signalling contact
No
Test standards Germany
Test standards International
IEC 61643-21
Test standards USA
UL497B
Homologation
UL/EAC
![Response time [ta]](https://image.aflury.ch/imageService/?width=60&height=60&grow=1&schema=srgb&schema=srgb&schema=srgb&img=sub47%2F17b59c00a5a65f78.jpg)
![Discharge current max. [Imax]](https://image.aflury.ch/imageService/?width=60&height=60&grow=1&schema=srgb&schema=srgb&schema=srgb&img=sub47%2F17b59bfb79cdd178.jpg)
